PG Cable Ladder M Series 90o Inside Vertical Bends (Fixed Type) (PG to ISO 10346)
| Order Code | Stock Code | H mm | W mm | T mm | Weight (kg/mt) |
| 710-M-04 | 01008710VBM04PG | 40 | 100 | 1,2 | 0.795 |
| 720-M-04 | 01008720VBM04PG | 40 | 200 | 1,2 | 0.945 |
| 730-M-04 | 01008730VBM04PG | 40 | 300 | 1,2 | 1.170 |
| 740-M-04 | 01008740VBM04PG | 40 | 400 | 1,2 | 1.290 |
| 750-M-04 | 01008750VBM04PG | 40 | 500 | 1,2 | 1.410 |
| 760-M-04 | 01008760VBM04PG | 40 | 600 | 1,2 | 1.530 |
| 710-M-05 | 01008710VBM05PG | 50 | 100 | 1,2 | 1.245 |
| 720-M-05 | 01008720VBM05PG | 50 | 200 | 1,2 | 1.395 |
| 730-M-05 | 01008730VBM05PG | 50 | 300 | 1,2 | 1.620 |
| 740-M-05 | 01008740VBM05PG | 50 | 400 | 1,2 | 1.740 |
| 750-M-05 | 01008750VBM05PG | 50 | 500 | 1,2 | 1.860 |
| 760-M-05 | 01008760VBM05PG | 50 | 600 | 1,2 | 1.980 |
| 710-M-06 | 01008710VBM06PG | 60 | 100 | 1,2 | 1.055 |
| 720-M-06 | 01008720VBM06PG | 60 | 200 | 1,2 | 1.205 |
| 730-M-06 | 01008730VBM06PG | 60 | 300 | 1,2 | 1.430 |
| 740-M-06 | 01008740VBM06PG | 60 | 400 | 1,2 | 1.550 |
| 750-M-06 | 01008750VBM06PG | 60 | 500 | 1,2 | 1.670 |
| 760-M-06 | 01008760VBM06PG | 60 | 600 | 1,2 | 1.800 |
| 710-M-07 | 01008710VBM07PG | 70 | 100 | 1,2 | 1.505 |
| 720-M-07 | 01008720VBM07PG | 70 | 200 | 1,2 | 1.655 |
| 730-M-07 | 01008730VBM07PG | 70 | 300 | 1,2 | 1.880 |
| 740-M-07 | 01008740VBM07PG | 70 | 400 | 1,2 | 2.000 |
| 750-M-07 | 01008750VBM07PG | 70 | 500 | 1,2 | 2.120 |
| 760-M-07 | 01008760VBM07PG | 70 | 600 | 1,2 | 2.250 |
| 710-M-10 | 01008710VBM10PG | 100 | 100 | 1,2 | 2,305 |
| 720-M-10 | 01008720VBM10PG | 100 | 200 | 1,2 | 2,455 |
| 730-M-10 | 01008730VBM10PG | 100 | 300 | 1,2 | 2,680 |
| 740-M-10 | 01008740VBM10PG | 100 | 400 | 1,2 | 2,800 |
| 750-M-10 | 01008750VBM10PG | 100 | 500 | 1,2 | 3,025 |
| 760-M-10 | 01008760VBM10PG | 100 | 600 | 1,2 | 3,280 |
INFORMATION:
L: Length
T: Thickness
W: Width
PG: Pregalvanized
HDG: Hot Dip Galvanized
Material Thickness and Weight Tolerans: ± 10
DESCRIPTIONS:
1- “A ve B” Sizes Are Equal In Standard Production If Required
“B Sizes” Can Be Changed By Using Reducing Parts.
2- For other rediouses, please refer to page 240.
3- Different sheet thicknesses can be produced.
4- Please indicate order code and the Type of coating in your orders.