PG Cable Ladder M Series 90 Outside Vertical Bends (Fixed Type) (PG to ISO 10346)
| Order Code | Stock Code | H mm | W mm | T mm | Weight (kg/mt) |
| 810-M-04 PG | 01008810VBM04PG | 40 | 100 | 1,2 | 0.755 |
| 820-M-04 PG | 01008820VBM04PG | 40 | 200 | 1,2 | 0.905 |
| 830-M-04 PG | 01008830VBM04PG | 40 | 300 | 1,2 | 1.130 |
| 840-M-04 PG | 01008840VBM04PG | 40 | 400 | 1,2 | 1.250 |
| 850-M-04 PG | 01008850VBM04PG | 40 | 500 | 1,2 | 1.370 |
| 860-M-04 PG | 01008860VBM04PG | 40 | 600 | 1,2 | 1.490 |
| 810-M-05 PG | 01008810VBM05PG | 50 | 100 | 1,2 | 1.205 |
| 820-M-05 PG | 01008820VBM05PG | 50 | 200 | 1,2 | 1.355 |
| 830-M-05 PG | 01008830VBM05PG | 50 | 300 | 1,2 | 1.580 |
| 840-M-05 PG | 01008840VBM05PG | 50 | 400 | 1,2 | 1.700 |
| 850-M-05 PG | 01008850VBM05PG | 50 | 500 | 1,2 | 1.820 |
| 860-M-05 PG | 01008860VBM05PG | 50 | 600 | 1,2 | 1.940 |
| 810-M-06 PG | 01008810VBM06PG | 60 | 100 | 1,2 | 1.015 |
| 820-M-06 PG | 01008820VBM06PG | 60 | 200 | 1,2 | 1.165 |
| 830-M-06 PG | 01008830VBM06PG | 60 | 300 | 1,2 | 1.390 |
| 840-M-06 PG | 01008840VBM06PG | 60 | 400 | 1,2 | 1.510 |
| 850-M-06 PG | 01008850VBM06PG | 60 | 500 | 1,2 | 1.630 |
| 860-M-06 PG | 01008860VBM06PG | 60 | 600 | 1,2 | 1.750 |
| 810-M-07 PG | 01008810VBM07PG | 70 | 100 | 1,2 | 1.465 |
| 820-M-07 PG | 01008820VBM07PG | 70 | 200 | 1,2 | 1.615 |
| 830-M-07 PG | 01008830VBM07PG | 70 | 300 | 1,2 | 1.840 |
| 840-M-07 PG | 01008840VBM07PG | 70 | 400 | 1,2 | 1.960 |
| 850-M-07 PG | 01008850VBM07PG | 70 | 500 | 1,2 | 2.080 |
| 860-M-07 PG | 01008860VBM07PG | 70 | 600 | 1,2 | 2.200 |
| 810 M-10 PG | 01008810VBM10PG | 100 | 100 | 1,2 | 1.835 |
| 820-M-10 PG | 01008820VBM10PG | 100 | 200 | 1,2 | 1.985 |
| 830-M-10 PG | 01008830VBM10PG | 100 | 300 | 1,2 | 2.210 |
| 840-M-10 PG | 01008840VBM10PG | 100 | 400 | 1,2 | 2.330 |
| 850-M-10 PG | 01008850VBM10PG | 100 | 500 | 1,2 | 2.450 |
| 860-M-10 PG | 01008860VBM10PG | 100 | 600 | 1,2 | 2.570 |
INFORMATION:
L: Length
T: Thickness
W: Width
PG: Pregalvanized
HDG: Hot Dip Galvanized
Material Thickness and Weight Tolerans: ± 10
DESCRIPTIONS:
1- “A ve B” Sizes Are Equal In Standard Production If Required
“B Sizes” Can Be Changed By Using Reducing Parts.
2- For other rediouses, please refer to page 240.
3- Different sheet thicknesses can be produced.
4- Please indicate order code and the Type of coating in your orders.