PG Cable Ladder M Series Horizontal Bends Tee (PG to ISO 10346)
| Order Code | Stock Code | H mm | W mm | T mm | Weight (kg/mt) |
| 210-M-04 PG | 01008210HTM04PG | 40 | 100 | 1,2 | 0.300 |
| 220-M-04 PG | 01008220HTM04PG | 40 | 200 | 1,2 | 0.350 |
| 230-M-04 PG | 01008230HTM04PG | 40 | 300 | 1,2 | 0.400 |
| 240-M-04 PG | 01008240HTM04PG | 40 | 400 | 1,2 | 0.450 |
| 250-M-04 PG | 01008250HTM04PG | 40 | 500 | 1,2 | 1.300 |
| 260-M-04 PG | 01008260HTM04PG | 40 | 600 | 1,2 | 1.350 |
| 210-M-05 PG | 01008210HTM05PG | 50 | 100 | 1,2 | 2.400 |
| 220-M-05 PG | 01008220HTM05PG | 50 | 200 | 1,2 | 2.450 |
| 230-M-05 PG | 01008230HTM05PG | 50 | 300 | 1,2 | 3.300 |
| 240-M-05 PG | 01008240HTM05PG | 50 | 400 | 1,2 | 3.350 |
| 250-M-05 PG | 01008250HTM05PG | 50 | 500 | 1,2 | 3.400 |
| 260-M-05 PG | 01008260HTM05PG | 50 | 600 | 1,2 | 3.450 |
| 210-M-06 PG | 01008210HTM06PG | 60 | 100 | 1,2 | 5.300 |
| 220-M-06 PG | 01008220HTM06PG | 60 | 200 | 1,2 | 5.350 |
| 230-M-06 PG | 01008230HTM06PG | 60 | 300 | 1,2 | 5.400 |
| 240-M-06 PG | 01008240HTM06PG | 60 | 400 | 1,2 | 5.450 |
| 250-M-06 PG | 01008250HTM06PG | 60 | 500 | 1,2 | 6.300 |
| 260-M-06 PG | 01008260HTM06PG | 60 | 600 | 1,2 | 6.350 |
| 210-M-07 PG | 01008210HTM07PG | 70 | 100 | 1,2 | 7.400 |
| 220-M-07 PG | 01008220HTM07PG | 70 | 200 | 1,2 | 7.450 |
| 230-M-07 PG | 01008230HTM07PG | 70 | 300 | 1,2 | 8.300 |
| 240-M-07 PG | 01008240HTM07PG | 70 | 400 | 1,2 | 8.350 |
| 250-M-07 PG | 01008250HTM07PG | 70 | 500 | 1,2 | 8.400 |
| 260-M-07 PG | 01008260HTM07PG | 70 | 600 | 1,2 | 8.450 |
| 210-M-10 PG | 01008210HTM10PG | 100 | 100 | 1,2 | 10.300 |
| 210-M-10 PG | 01008220HTM10PG | 100 | 200 | 1,2 | 10.350 |
| 230-M-10 PG | 01008230HTM10PG | 100 | 300 | 1,2 | 10.400 |
| 240-M-10 PG | 01008240HTM10PG | 100 | 400 | 1,2 | 10.450 |
| 250-M-10 PG | 01008250HTM10PG | 100 | 500 | 1,2 | 11.300 |
| 260-M-10 PG | 01008260HTM10PG | 100 | 600 | 1,2 | 11.350 |
INFORMATION:
L: Length
T: Thickness
W: Width
PG: Pregalvanized
HDG: Hot Dip Galvanized
Material Thickness and Weight Tolerans: ± 10
DESCRIPTIONS:
1- A,B,C and D” Sizes Are Equal In Standard Production If Required
“B,C and D Sizes Can Be Changed By Using Reducing Parts.
2- For other rediouses, please refer to sayfa 240.
3- Different sheet thicknesses can be produced.
4- Please indicate order code and the Type of coating in your orders.